One friend wanted to be able to control a light setting on top of a tall bookcase and the only outlet was behind the bookcase. Another wanted to switch a bedside reading lamp from a bedside table. Both of these tasks are easily accomplished inexpensively with this two component X10 system. Our discussion of this type of installation is a great introduction on how to select the right components and what to do if you don't get the results you want.
This project is very similar to the basic remote controlled lamp project except that it uses a lamp module instead of an appliance module so that the brightness of the lamp can be adjusted.
DETAILED VERSION --- SUCCINCT VERSION
Project #3
REMOTELY CONTROLLED LIGHT PROJECT ON A WALL SWITCH
This project is very similar to the above project except that it uses a wall switch module to replace a conventional switch so that the light can be controlled from remote locations as well.
Never walk into a dark room and fumble for the light switch again. The Hawkeye motion sensor is a great addition to your system.
DETAILED VERSION
Project #5
MOTION CONTROLLED LAMP PROJECT
with ACTIVE HOME ENHANCEMENT
The Active Home Package is a wonderful set of components for the home owner that wants to go the next step in home automation and security.
DETAILED VERSION
AN OUTDOOR MOTION DETECTOR FOR HOME SECURITY AND USE AS AN AUTOMATIC DOORBELL
The outdoor motion detector with floodlamps can provide a measure of security for you and serve as a doorbell as well.
ENHANCEMENTS
The next few items are ways to make your existing projects even more useful.
RF Controllers are battery operated units that can be placed anywhere you want control of lamps or other devices.
NOTE
We expect to be adding many more projects soon. Please check back often.